Configuring an Endpoints Group

After adding a group to OVOC as shown in the OVOC User's Manual, you can add an endpoint - or multiple endpoints - to that group as shown here under the action Change Group, and then you can configure the endpoints in the group as shown below. The feature benefits a customer who wants for example 10 of 500 phones in a site in their enterprise organized in a group for a software upgrade to apply exclusively to the 10 phones in that group. In contrast to sites, groups are logical entities but configuration of both are identical; both are per tenant.

➢

To configure an endpoints group:

1.

Open the Group Configuration page (Setup > Configuration > Group Configuration).

2.

Click the Add Configuration Value button.

3.

From the 'Select Group' drop-down, choose the group under which you want to organize endpoints.

4.

From the 'Type Key' drop-down, select a parameter to configure for the endpoints group.

5.

Provision the parameter with a value and then click Add.